hidden black powder guns

[iceman69]

black powder barrels are cheap exspecially pistol bbls. Also can be purchased with breech pre installed. What about a black powder 50 cal bbl say 6 inches mounted inside a maglite or cane? the firing mechinism would be diffacult but one ponders will a bbq starter provide adequate ignition through the pre installed touch hole on the barrell? it could be put where the mag lite switch is. what do you think?

[crazy white guy]

walk into your local home hardware and you've got all your materials

you can make it look really professional by making one from pipes and making the bullet come out through the lamp hole

[Th0r]

You might want to draw up design ideas...

From your description I was not quite clear about what you were suggesting...

CRWG is right...

[crazy white guy]

You might want to draw up design ideas...

From your description I was not quite clear about what you were suggesting...

CRWG is right...

basically a tube that will fit the bullet in it and act as the barrel, a threaded stopper with a hole in it for the firing pin to go through and an end cap with a opposite thread rotation. the pin would be held in place by a little arm that is controlled by the flashlight's button. when the button is pressed, the arm is let go and through spring tension the pin hits the primer.

thats the ghetto way. A slightly less ghetto way to do it would be for the stopper slug to be free floating on a spring and when the cartidge fires the spring tenstion takes most of the force. This is mainly done because bullets are shitty for not exploding when you dont want them to. This makes for less stress on the gun. With this less ghetto plan you could re-load it in about 20 seconds if you didnt clean it after every shot (which is reccomended)

If you want i can draw you a plan for it =)

whats CRWG?

[Th0r]

If you want i can draw you a plan for it =)

whats CRWG?

I would like to see it...

Crazy White Guy

[crazy white guy]

I would like to see it...

Crazy White Guy

i'll scan something up in a little bit

why not just cwg? lol

[crazy white guy]

click here to see my drawing (http://i147.photobucket.com/albums/r286/vee_door/internets%20people/penstaffthinger.jpg)

theres the mechanism drawing of the pen/staf/pipe gun

theres a little arm thinger that juts out
this holds the pin in tension

you cant really see it in the pic but theres a little nubbin that holds the pin to the stopper. That (when pulled back) makes the spring tensioned. I just noticed that the mechanism is armed but it still hasent pulled back

so imagine that but with the stopper and pin pulled back a bit

when you press the button, the arm holding the pin up is pushed back and will no longer hold it. the pin goes down to hit the primer and shoot the bullet. Once the primer is hit, the bullet goes forward and the cartridge pushes backwards. The spring takes a lot of the force and the rest of it goes to damaging your weapon =)

this gun is perfect for murder in the fact that it can be easily hidden in a flashlight, newspaper, cane, staff, pen, remote control ect and it can be used with a silencer to make it virtually silent with subsonic round