PDA

View Full Version : Coke bottle shaped charge


True Sounds
22nd March 2007, 11:27 PM
lately I have seen alot of coke bottles that are available in a certain border area. Meaning if they want to know how to stop heavy steel armor clad vehichles or sabotage an oil pipeline it's going to be easy with these intructions; but first here's what you'll need: A glass cokebottle 6.5 ounces in size; about one pound of either castable or plastic explosive; a blasting cap;a metal cylinder about six inches long and twi inches inner diameter;plug to fit mouth of coke bottle ;non-metal rod about 1/4 inch in diameter and 8 inches long;tape or string. 1st. step is to take the plug and plug the bottle with it. 2nd. step is to place cylinder over top of bottle until bottom of cylinder rests on widest part of bottle then tape cylinder on top of bottle. 3rd. step :if plastic explosive is used tamp with rod until cylinder is full. 4th step is to place rod about 1/2 of an inch into the middle top of the explosive charge to form a hole for the blasting cap.

Stone
23rd March 2007, 11:41 AM
What the fuck are you on about?

Nox (ADVANCED)
24th March 2007, 07:31 AM
How many and what drugs he has taken.

Dav_Daddy
27th June 2007, 08:52 AM
Sounds like failure to take perhaps?

Mr.V
28th June 2007, 10:11 PM
WowzersSS!!!!
Thats really leet!
ounces in size ? :spankme:

THErAPIST
2nd July 2007, 03:39 AM
so what's the standoff distance for said charge, is the bottom of the bottle up to where the tube starts suppose to give proper stand off distance if the bottom of the bottle is placed against the target? how deeply will it penetrate metal? what size hole will be produced? any particular VOD range that is best suited for this particular charge? where would you put a shaped charge of this size on a large armor clad vehicle to stop it? would a charge of this size really sabotage an oil line? do you have any experience with a charge of this type? what book did this come out of?

death11284
16th August 2007, 06:58 PM
If you're going to do this just make a classic fucking pipe bomb. Make about 2-3 grams of AP for a cap, and as much RDX/ETN as you can.

For the charge:
Put a cap with no holes etc in one side of the copper pipe.
Melt the ETN/RDX with your preferred casting method, get it nice and dense for a high VOD.
Put a hole through the center of it with whatever you fucking want to.

For the Cap:
Once the ETN/RDX is dry fill that hole up with AP.
Now take the cap for the other side of the pipe and drill a hole in it 1/16 of an inch larger then your fuse (DO NOT DO THIS WHEN IT'S ON THE PIPE IF YOU VALUE YOUR LIFE).
Insert fuse into AP, cap it, tape it, wtfever, you're good to go.

This will ACTUALLY be able to take on armor, it will blow a hole in steel, etc, due to it's very high VOD and brisance.

W4RGASM
20th August 2007, 05:03 PM
If you're going to do this just make a classic fucking pipe bomb. Make about 2-3 grams of AP for a cap, and as much RDX/ETN as you can.

For the charge:
Put a cap with no holes etc in one side of the copper pipe.
Melt the ETN/RDX with your preferred casting method, get it nice and dense for a high VOD.
Put a hole through the center of it with whatever you fucking want to.

For the Cap:
Once the ETN/RDX is dry fill that hole up with AP.
Now take the cap for the other side of the pipe and drill a hole in it 1/16 of an inch larger then your fuse (DO NOT DO THIS WHEN IT'S ON THE PIPE IF YOU VALUE YOUR LIFE).
Insert fuse into AP, cap it, tape it, wtfever, you're good to go.

This will ACTUALLY be able to take on armor, it will blow a hole in steel, etc, due to it's very high VOD and brisance.

... and 90% of your force is wasted to the surroundings.

At least rapist seems to have somde idea what he's doing.

W4RGASM
20th August 2007, 05:04 PM
Additional: Coke bottles have flat bottoms, asshole.

torcher
20th August 2007, 05:33 PM
Additional: Coke bottles have flat bottoms, asshole.

youve never seen a glass coke bottle.

oh yeah, death11284, pipe bombs work for damage to large areas. shaped charges are used for a localized explosion for cutting or opening things.

W4RGASM
21st August 2007, 10:52 AM
youve never seen a glass coke bottle.

oh yeah, death11284, pipe bombs work for damage to large areas. shaped charges are used for a localized explosion for cutting or opening things.

Maybe they're different 'round your parts, but I flat-out refuse to believe that they have enough of a curve in their bottom to function as a shaped charge.

headcase
21st August 2007, 04:02 PM
From what I gather he's trying to say, the coke bottle is the projectile. The cylinder full of explosives shoots the glass coke bottle at the tank. Good luck taking down a tank with a glass projectile.






Why are we even discussing this?

torcher
21st August 2007, 06:53 PM
Why are we even discussing this?

i was drunk. now that im awake and sober, i dont know why we are either.

firextol the explosion could make the pieces of glass so small that it wouldnt do anything. it would look like dust. metal will always be a more damaging shrapnel.

W4RGASM
22nd August 2007, 11:19 AM
FFS, don't talk about shit if you don't know anything about it. Glass can make a very effective shaped charge; though admittedly nowhere near as effective as a decent copper liner. The point is expediency through resources available to you, not many people (especially in the time of an invasion/occupation crisis or survival situation) will have access to machine tools, and comples equipment for forming sheet copper into perfect cones. So we make do; by identifying substitutes while we still have the luxury to do so: Wine/Champagne bottles, raid cans, bullet jackets.

Now shut the fuck up, son, you've got an expert on deck.

torcher
22nd August 2007, 04:16 PM
right.

what was the point?

W4RGASM
23rd August 2007, 06:35 AM
right.

what was the point?


Oh, I'm sorry, can't you read?

The point was that glass DOES work as a shaped charge
; but not as effectively as some other substances. But glass is far mroe available, pre-cast and shaped.

Pay attention next time, I won't explain it twice.